DIY Cabochon Jewelry

As much as I love sewing, sometimes I get the urge to do something a little different. I've been planning some of my DIY Christmas gifts this year and I thought it would be really fun to make some pretty jewelry for friends and family.

Flower cabochons have always had sort of a vintage feel to me and I find them to be really beautiful. You can buy them from many different sources online (here are a ton sold on Etsy) and they are really reasonably priced. Basically they are just molded resin and are really lightweight and easy to work with when crafting. You can attach them to just about anything, but this year I decided to make rings, earrings and hair pins.

If you get these going in assembly line style, you will have plenty of jewelry in no time!

DIY Cabochon Jewelry

by Lindsay Wilkes from The Cottage Mama

Supplies:

Flower cabochons (found here)

Blank bobby pins, rings or earrings

E6000 or other industrial strength glue

Instructions:

Gather up all of your supplies for this project.

Like I said above, you can purchase some really gorgeous cabochons via Etsy.com. I ordered all different shapes and sizes so I would have a wide variety of different styles and colors.

As far as the blanks go for bobby pins, rings or earrings, I purchased the earrings and bobby pins online and found the rings at our local Joann super-store. You will have more of a selection if you order online, but you should be able to find all of these at your local craft store. Our lovely blog sponsor, Crafter's Vision carries some different blanks as well.

I bought adjustable rings because I'm not sure of everyone's ring size. Just make sure the blank portion of the ring is smaller than your cabochon (or at least the same size). The square rings (that came in this variety pack) didn't really work for this project since the blank was too big.

E6000 is a great glue to have in your stash of craft supplies. It's super strong and dries clear. You can find this at your local craft supply store. If for some reason you can't find this, then just look for another industrial strength glue. Jewelry gets a lot of wear and tear, so you don't want it falling apart.

So this project is really simple. Take a dab of glue and place it onto the blank jewelry, then press your cabochon on top. Leave them upside down to dry for at least 24 hours.

For the smaller pieces, like the earrings, I just put a dab of glue on some paper and dipped the top of the blank part of the earrings and pressed them to the cabochons.

These make great gifts for girlfriends, teenage girls and teachers.

Package these pretties up and you are good to go! 

Mason Jar Soap Dispenser ~ Tutorial

I have a thing for mason jars. Big, small, new, old........but the ones that really grab my heart are the blue jars. I have quite the collection these days. Some of them I got from my Grandma Peggy and some of them I have picked up here and there from garage sales, flea markets and thrift stores. The blue glass is just so pretty and soothing......I absolutely love them!

I have been wanting to turn several of the old blue jars into soap dispensers for about the last two years. I've seen some mason jar soap dispensers for sale and always thought they would go so perfectly with our cottage-style home. A couple months ago I finally mentioned my interest in this project to my husband thinking I could have him help me by drilling the hole in the top of the lids. But sometimes, I just get so impatient that I decided to take things into my own hands. A girl's got to do what a girl's got to do, you know?

So, with that being said, there is probably a more correct way to do this project if you really know how to use a drill and a metal drill bit, but if you would prefer to just use basic tools, this tutorial is for you! Plus it will only take you 10 - 20 minutes.

Mason Jar Soap Dispenser

by Lindsay Wilkes from The Cottage Mama

Supplies:

1 blue mason jar and metal lid

1 soap dispenser top

Phillips head screw driver

Needle nose pliers

Safety glasses (optional)

Scissors

Sharpie or other marker

Instructions:

Mark a hole with a sharpie in the center of the metal lid where you would like to put your soap dispenser.

The inside of the old metal lids have a ceramic lining inside. You need to remove this in order to make the hole for the soap dispenser. To remove the ceramic insert, just pound on it really hard with your screwdriver until it cracks. Once it cracks, the pieces come out really easily.

During this step I would recommend wearing safety glasses because the little ceramic pieces can fly up in the air and get into your eyes. But again, that is totally optional. Rinse out the inside of the lid once you have removed the ceramic pieces.

Now this next step is a little wild. You are going to take your screw driver and pound down on the little black mark that you made in the first step. I pounded about 4-6 times and then pushed down with all my might. You could also be a little less crazy and just take a hammer and hammer down on top of the screw driver to drive it through the center of the lid.

In the picture above, you can see how nicely the screwdriver will go through the top of the lid.

As you can see, the hole that was made from the screwdriver is not big enough to accomodate my soap dispenser, so I needed to make it larger. This soap dispenser top was from another store-bought hand soap bottle that we already had in the house. You could buy a fancier one or buy a plastic one at your local craft store.

If you are using a top from a bottle you already have, just make sure to pump out the soap and wash it out really well with warm water.

To make the hole in the metal lid larger, take your pliers and peel back the metal. This step is surprisingly easy. Just pull back the metal and check and see if your soap dispenser will fit. You want the fit to be very tight so that the top does not move around, so make sure you don't pull back too much metal before testing the fit.

This step could also be done with a drill and a metal drill bit, but again, you want the fit to be very tight so make sure you don't use a bit that is larger than the soap dispenser.

Fit your soap dispenser into the metal lid. Again, I can't say it enough, but you really want to have to work the soap dispenser into the lid so it's really tight. Since we pounded so much on the lid, you may just need to pop the top of the lid back out a little bit.

Now you need to cut the plastic tube from the soap dispenser to fit your jar. Use the scissors and cut it to size. It should be close to the bottom of the jar, but not touching.

Fill the jar with your favorite hand soap, put the lid on top and enjoy!

These mason jar soap dispensers would make lovely gifts for the holidays or as a housewarming gift. I made these two in about 20 minutes, so it is a very quick and easy project. Plus it's kind of fun to get out the tools!

Cottage Mama's Note: You could probably do this project with a regular store-bought mason jar, but you would need to make sure you attached the center lid insert to the outer ring really well. Also, I'm not sure how easy that metal is to poke through with your screw driver (the old metal was pretty easy), but if that's what you have, then give it a try!

Easy Eye Glass {or Rotary Cutter} Case Tutorial

Today we have a special guest, my mom (aka Grandma Jane) with another one of her quick and easy quilting tutorials. Take it away Mom........

I would really encourage any new quilter to find some sort of quilting group to join. It is a great way to learn from and be inspired by more experienced quilters, share quilting projects, get advice and support, and most of all, to make new friends who are as crazy as you are about quilting! There are a lot of online quilting resources out there (after all, you are reading this blog) but a group that you can physically be part of is a gift if you can find one. Most areas have quilting guilds that you can join, quilt shops may have classes and open sew times, or just gather a few of your friends together to sew up a storm.

Early morning Camp Allen and a porch just made for quiet reflection….

I returned recently from a weekend quilting retreat with a group of wonderful women! Our weekend retreat at Camp Allen north of Houston was filled with lots of sewing, sharing good food, plenty of laughter, personal reflection, prayer and fellowship. There were twenty women of all ages ranging from a 16-year old granddaughter of one of the members to a great-grandmother with 25 grandchildren and everything in between. I can’t tell you all the “details” of our weekend because what happens at Camp Allen….stays at Camp Allen… but I will say just say lots of new quilting tattoos went home. Shhhh….

I started quilting about two years ago when I was invited by my friend, Diane, to join the church quilt ministry group. The group meets several times a week with evening and daytime meetings to accommodate schedules for everyone with the focus on ministry projects for the church. These women make quilts for each baby dedicated at church, prayer blankets for hospitalized church members and recently sent 58 (yes, I said 58!) jelly roll strip quilts to missionaries in Guatemala. Margaret and Barbara, the leaders of the group, are an inspiration in many ways. Not only do they have awesome quilting skills but they are women of incredible strength and faith.

The service project that everyone worked on during our weekend, in addition to their own sewing, was a cute little glass case. The goal is to make 90 of these cases to be included in goodie bags for the breast cancer survivors being honored at a gala in March at a local hospital. October is National Breast Cancer Awareness Month so how fitting to be working on this project at our retreat. This is a really easy project that would be a great gift idea/stocking stuffer for Christmas, too. If you don’t need it for glasses—it makes a perfect holder for a rotary cutter for your favorite quilter!

This project is inspired by the Quilts and More Magazine project in the Summer 2012 issue. 

Easy Eye Glass {or Rotary Cutter} Case Tutorial

by Grandma Jane for The Cottage Mama

SUPPLIES:
(1) 9 inch square of batting
(1) 7 ½ inch square of outer fabric
(1) 7 ½ inch square of lining fabric—flannel works well
(1) 1 ¾ x 9 inch strip for strap

INSTRUCTIONS:

1. Center outer fabric on batting and quilt as desired. I used a cross-hatch design that I marked with a fabric pen prior to sewing. Trim batting even with fabric.

2. Fold strap piece in half lengthwise and press. Unfold and fold in long edges to meet in the middle. Refold in half along pressed edge and edge-stitch.

3. Fold stitched strap in half cross wise. Pin to top edge of outer fabric ½ inch from left edge. Baste. If your fabric is directional—make sure to have it going the direction you want at this point.

4. Place lining fabric on top—right sides together and stitch ¼ inch seam across top, catching in strap.

5. Press open with seam allowance towards lining and edge stitch lining.

6. Fold edges together lengthwise and stitch a ¼ seam around outer edge, leaving short-end of lining open. Clip corners.

7. Turn case right side out. Turn in short edges of lining ¼ inch and press. Hand stitch or machine sew short end of lining. 8. Insert lining into case and press again! Easy!!!

Thanks so much for joining us today, Mom! It always so fun to have you here.  I definitely think these will be on my easy gift giving project list for this year!